Friedrich MRM36Y3J Installation And Operation Manual page 28

Installation of outdoor unit
1. Place the outdoor unit on the support.
2. Fix the foot holes of outdoor unit with bolts.
Step four: connect indoor and outdoor pipes
1. Remove the screw on the right handle of outdoor unit
and then remove the handle.
2. Remove the screw cap of valve and
liquid
valve
3. Pretightening the
4. Tighten the nut with torque wrench by referring to the sheet below.
liquid pipe
gas pipe
gas valve
nut hand.
Hex nut diameter Tightening torque
2
foot holes
foot holes
pipe joint
nut
(N . m)
30~40
screw
handle