Table of Contents
Advertisement
The exclusively designed mount bracket
shall be used.
Failure to observe this may cause a drop
resulting in injury or accidents.
Use the exclusively designed mount bracket for
installation.
The screws and bolts must be tightened to
the specified torque.
Failure to observe this may cause a drop
resulting in injury or accidents.
Turn the power off when do wiring of this
product.
Failure to observe this may cause electric
shock. In addition, short circuit or wrong wiring
may cause fire.
Install this product in a location high
enough to avoid people and objects from
bumping the product.
Failure to observe this may cause injury.
Do not install this product in locations
subject to vibration.
Loosening of mounting screws or bolts may
cause a fall of the product resulting in injury or
accidents.
Correctly perform all wiring
Short circuits in the wiring or incorrect wiring
may cause fire or electrical shock.
Install the product securely on a wall or a
ceiling in accordance with the installation
instructions.
Failure to observe this may cause injury or
accidents.
Turn the power off when cleaning this
product.
Failure to observe this may cause injury.
Do not rub the edges of metal parts with
your hand.
Failure to observe this may cause injury.
Do not touch the metal part of the bottom
side of the product.
The metal part of the bottom side may become
hot while the product is in use. Direct skin con-
tact with high-temperature parts of the product
may cause burns.
[Precautions for use]
When the product is accessible from the
Internet
To prevent unauthorized access, note the fol-
lowing.
• Leave user authentication turned on.
• Periodically change passwords that are
used to access the product.
Refer to the Operating Instructions on the
Panasonic support website for information
about how to change passwords.
To keep on using with stable performance
Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product. Do not expose this
product to direct heat sources such as a heater.
This product has no power switch.
When turning off the power, disconnect the
power supply from the 12 V DC power supply
or the PoE device.
Usage such as switching the power ON/
OFF frequently could lead to failure of the
camera.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. Failure to observe this
may cause trouble.
About the battery
A battery is installed inside the camera. Do not
leave the battery exposed in environments of
excessive heat as a result of sunlight or fire.
Do not subject dome cover to strong
impact.
Doing so may cause damage or immersion.
Do not touch the dome cover with your
bare hands.
A dirty dome cover causes deterioration of pic-
ture quality.
10
Advertisement
Table of Contents
