Date/Time Setting; Cmt/Pl-3 - TEC EO1-31001 Owner's Manual

11. PROGRAMMING PROCEDURES

11.12 DATE/TIME SETTING

Menu Page: 2
Item No.: 1
Date, time, machine number, and store code are set with this procedure.
<MENU>
Page 2
Set the machine No.
(max. 6 dig.)
NOTES:
1. Express the time in a 24-hour military format.
2. The SL-9000 will check details of date (time) input, and any wrong date (time) will result in
an error mode. Then the correct date (time) should be re-entered and press the
key.
3. Even when initial Set 8-4, 8-5 or 8-6 is set to the "Julian Date" side, the way to enter the
date in the date setting operation is the same as in the ordinary case.
4. The date display method can be changed by the initial setting.

11.13 CMT/PL-3

Menu Page: 2
Item No.: 2
■
CMT Operations
The SL-9000 is designed to interface with a Cassette Magnetic Tape loader. This loader allows the
transfer of the entire PLU file, ingredient file and other data from the SL-9000 to tapes. This can be
accomplished in number of operation steps.
In turn, information from the tape can also be transferred to another SL-9000 scale.
<MENU>
Page 2
NOTES:
1. The error mode can be released by pressing the
through the above steps.
2. Use the metal cassette tape which is commercially available and has a capacity of 45 or
60 minutes recording.
3. For operations of the CMT loader, refer to the instruction manual provided with the CMT
loader.
k
Set the date.
1
(Month, Day, Year)
ENTER
Set the transmission items.
2
(Refer to table 4)
NEXT
PLU
ENTER
Set the store No.
(max. 5 dig.)
or
CLEAR
11-20
11.12 DATE/TIME SETTING
Set the time.
(Hour, Minute)
k
ENTER
PROG.
ESC.
<MENU>
PROG.
ENTER
Page 2
Main
ESC.
<MENU>
key, and operated again
ENTER
<MENU>
Page 2
Main
<MENU>
CLEAR