Date/Time - TEC SL-9000-ESB-X SERIES Owner's Manual

11. PROGRAMMING PROCEDURES
11.5 DATE/TIME SETTING
Menu Group: 1
Item No.:
Date, time, machine number, and store code are set in this procedure.
4
PROG.
Set the machine No.
(max. 6 dig.)
NOTES:
1. Express the time in a 24-hour military format.
2. The SL-9000 will check details of date (time) input, and any wrong date (time) will result in an error.
Then the correct date (time) should be re-entered and press the CLEAR key.
3. Even when the initial Setting # 8-4, 8-5 or 8-6 is set to the "Julian Date" the way to enter the date
in the date setting operation is the same in the ordinary case.
4. The date display method can be changed by the initial setting.
11.6 CMT/PL-3
Menu Group: 1
Item No.:
CMT OPERATIONS
SL-9000 is designed to interface with a Cassette Magnetic Tape loader. This loader allows the
transfer of the entire PLU file, ingredient file and other data from the SL-9000 to tapes. This can be
accomplished in number of operation steps.
In turn, information from the tape can also be transferred to another SL-9000 scale.
5
NOTES:
1. The error mode can be released by pressing the CLEAR key, and operated again through the
above steps.
2. Use the metal cassette tape which is commercially available and has a capacity of 45 or 60 minutes
recording.
3. For operations of the CMT loader, refer to the instruction manual provided with the CMT loader.
4
k
Set the date.
(Month, Day, Year)
ENTER
5
Set the transmission items.
PROG.
(Refer to table 4)
ENTER
Set the store No.
(max. 5 dig.)
NEXT
or
PLU
11-10
11.11 DATE/TIME SETTING
Set the time.
(Hour, Minute)
k
PROG.
ENTER
ESC.
PROG.
ENTER
ESC.
ENTER
<MENU>
Group 1
Main
<MENU>
<MENU>
Group 1
Main
<MENU>