Using A Microsd Memory Card - Sharp Aquos SHV38 Series Basic Manual

Using a microSD Memory Card

Attaching a microSD Memory Card
A
Open the au Nano IC Card 04/microSD memory card cover
(zP.6).
B
Slowly insert the microSD memory card into the microSD
memory card slot.
Confirm the orientation for inserting, then insert in the direction of the arrow
until it clicks and is locked.
Releasing the microSD memory card before it is locked may cause it to
pop out.
C
Close the au Nano IC Card 04/microSD memory card cover.
◎ Make sure that the top/bottom and front/rear of the microSD memory card
are facing correctly.
Trying to force a wrongly oriented card into the slot could make it
impossible to remove the card or result in damage.
◎ Do not touch the terminal part of a microSD memory card.
Removing the microSD Memory Card
Be sure to unmount microSD card before removing. Not doing so may corrupt
data or card may no longer operate properly.
A
Open the au Nano IC Card 04/microSD memory card cover
(zP.6).
B
Slowly push the microSD memory card in all the way.
After it clicks, let the microSD memory card come back out a little without
releasing it. Releasing the card when it is pushed deeply into the slot may
cause it to pop out.
C
Slowly pull the microSD memory card straight out.
D
Close the au Nano IC Card 04/microSD memory card cover.
◎ Do not remove the microSD memory card forcefully. Doing so may result
in damage or data loss.
◎ The microSD memory card may become warm after a long time use, but
this is not a fault.
Metal part down
microSD
memory card slot
8