Creating Share Permissions For Ad Users And Local Users; Switching To Workgroup Mode From Active Directory - Iomega px4-400d User Manual

Using Active Directory Domain

Creating Share Permissions for AD Users and Local Users

You can create access permissions for both AD and local users on any new or existing Shares on your
px4-400d. For more information, see

Switching to Workgroup Mode from Active Directory

Switching your px4-400d from AD mode to Workgroup mode will remove all AD users and groups,
including AD admin users, from the px4-400d.
1. Click the Domain Management icon to open the feature management page.
2. Click the switch to turn off Active Directory.
3. Click Apply.
4. If you are an AD administrator making this change, you will be required to log back into the device
as a local user. If there isn't a local administrator account on the px4-400d, device setup will run to
enable you to create a new administrator user.
Creating a new local administrator user through device setup will not affect other configuration
settings or content stored on the px4-400d. Local users and groups will not be changed.
49 Managing Your px4-400d Network Storage with Local and Active Directory Users
adding Shares and managing Shares.