Table of Contents
Advertisement
Factory Reset
Factory Reset returns the px4-400d to its original state. This feature is useful if you give your px4-400d to
someone else.
Factory Reset provides two options for returning your px4-400d to its original state:
Quickly delete all data — permanently deletes all record of existing or deleted data, users, and
●
passwords.
Securely delete all data — this option takes significantly longer, but provides an added security
●
benefit by overwriting all drives with random data in addition to permanently erasing all data on the
drives to prevent recovery of existing or deleted data, users, and passwords. The secure delete
operation renders all data irrecoverable.
You can use the factory reset feature only to erase the drives internal to the px4-400d. You cannot
use this feature to reset any external storage devices that may be connected.
1.
Click the Factory Reset icon to open the management interface.
2.
Choose one of the following options:
Quickly delete all data
●
Securely delete all data
●
3.
From the After Reset drop-down menu, choose to Restart or Power off the px4-400d after the
factory reset completes.
4.
Click Apply.
5.
In the pop-up confirmation, click Yes to perform the factory reset. After the factory reset
completes, the px4-400d powers down or restarts depending on your selection.
6.
Device Setup will launch automatically when the px4-400d restarts, so you can configure basic
settings.
When you quickly delete or securely delete all data on your px4-400d, any installed applications,
as listed on the
download and reinstall your applications. In addition, you should visit the LenovoEMC support
web site for specific information on reinstalling applications that came preloaded with your px4-
400d.
Application Manager
page, are also deleted. Go to
Hardware Management
www.lifelineapps.com
to
Factory Reset
144
Advertisement
Table of Contents
