Using The Tv's Features; Navigating The Menus; Programming Channels Into The Tv's Channel Memory - Toshiba 42HM66 Owner's Manual

7

Using the TV's features

Navigating the menus

. Press MENU to open the menu system.
2. Press ▼ to select a menu, and then press ► to enter the menu.
3. Press ▼ to select a sub-menu, and then press ► to enter the sub-
menu.
4. a. To adjust a sub-menu with a slider bar, press ►. When done,
press ENTER and then press EXIT.
b. To adjust the other sub-menus, press ▲▼. When done, press EXIT.
Programming channels into the TV's
channel memory
. Press the TV/DTV button on eht remote control to select the source
(TV).
. Press MENU to open the menu system.
. Select the TV/DTV SETTING menu (see "Navigating the menus,"
above).
. Select the TV SYSTEM sub-menu.
. Press ▲▼ to select ANTENNA, CABLE STD, CABLE HRC, or
CABLE IRC and then press ENTER.
6. Press ▼ and then ► to select the AUTO SCAN sub-menu.
. Press ▲▼ to select YES, and then press ENTER. The automatic
channel scan starts.
Note: To manually stop the automatic channel scan, press EXIT.
0
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
Menu
Sub-menu
Slider bar