Remote Control Functions - Toshiba 42HM66 Owner's Manual

5
Using the Remote Control

Remote control functions

Note :
If the remote control does not work, press the TV button
and try again.

Button name
. POWER
. LED
. SET
. AUX
. CBL
6. TV
. VCR
8. Channel
Numbers
9. 00/ENT
0. – /INPUT
. VOL (+/–)
. CH RTN
. CH (+/–)
. MUTE
. INFO
6. MENU
. ENTER
18. ▲▼◄ ►
9. EXIT
0. GUIDE
. MTS / Play
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
Function
Turns the TV ON and OFF.
Blinks when the remote control is sending a
signal to the TV or is being programmed.
Starts all programming sequences.
Puts the remote control in AUXILIARY mode
(to operate a programmed device).
Puts the remote control in CABLE mode
(to operate a programmed cable TV set-
top box) or SATELLITE mode (to operate a
programmed satellite TV set-top box).
Puts the remote control in TV mode
(preprogrammed to operate this TV).
Puts the remote control in VCR mode (to
operate a programmed VCR).
Select a channel or input a password.
a. In TV mode, enters a channel number
greater than 00.
b. In other modes, functions as ENTER.
a. In TV mode, enters a decimal point for
DTV channel numbers.
b. In other modes, functions as INPUT.
Turns the volume up/down.
Tunes the previously viewed channel.
(Will not switch between TV and DTV
channels).
Changes the channel up/down.
Turns the sound ON and OFF.
Displays the current video and audio source
(and channel number in TV mode).
Opens the on-screen display (OSD) menus.
Selects options in the menus.
Navigate the menus.
Closes a menu or program guide, or exits
the device.
Turns the program guide ON and OFF in
DTV mode (see page 0).
a. In TV mode, toggles among STEREO,
SAP, and MONO audio.
b. In DTV mode, toggles among ENGLISH,
FRENCE, and SPANISH OSD languages.
c. In other modes, plays the CD player,
DVD player, or VCR.