Dear Customer, Child Safety Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual It Makes A Difference completely, and keep it nearby for future reference.
Important Safety Instructions Installation, Care, and Service Installation 1) Read these instructions. 2) Keep these instructions. Follow these recommendations and precautions and heed all 3) Heed all warnings. warnings when installing your TV: 4) Follow all instructions. 15) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal 5) Do not use this apparatus near...
Page 4
(16:9) display (gray bars on left and right sides of screen). Care Service For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service the TV yourself. Opening and 26) Always sit approximately 10–25 feet away from the TV and...
Page 5
Important Safety Precautions for Split Cabinet Feature (Toshiba TV models 65H82 and 65HDX82 only) Toshiba TV models 65H82 and 65HDX82 have a split cabinet 1) Always handle and treat the top section of the TV cabinet feature that allows disassembly of the cabinet into two (with the viewing screen), which contains a glass mirror, sections during installation.
(Theater Wide 2 and 3 only) ........37 Introduction ..............7 Selecting the cinema mode ........37 Welcome to Toshiba ............7 Using the POP double-window feature ......38 Exploring your new TV ........... 7 Switching the main and POP pictures ..... 39 Note regarding Quick Connect Guide ......
TV is turned on. on the market. The goal of this manual is to guide you through This feature provides on-screen setting up and operating your Toshiba TV as quickly as possible. instructions to guide you through the initial setup of your TV.
DVI-D digital single-link cable is for use with video equipment that has a DVI-D digital S-video cable single-link connector (see page 14). NOTE REGARDING PICTURE QUALITY When connecting video equipment to your Toshiba TV: For GOOD picture quality: Use a standard stereo A/V yellow video cable. Component video cables (typically color-coded red, green, blue) For BETTER picture quality: If your equipment has an S-video connector, use an S-video cable instead of a standard yellow video cable.
Connecting a cable converter box This connection allows you to watch basic and premium cable Note: channels. When you use a converter box with your TV, the remote control will not operate some To use the TV’s features, select ANT-1. To view premium channels, features, such as programming your favorite select ANT-2, tune the TV to channel 3 or 4 (whichever channel is channels, labeling channels, and locking...
Connecting a DVD player or satellite receiver and a VCR This connection allows you to watch DVD/satellite, VCR, and TV Note: programs, and record one channel while watching another channel. For the highest possible picture quality from a DVD player/satellite receiver without You will need: component video or DVI/HDCP, use an •...
® Your TV has ColorStream (component video) inputs. Connecting player. your TV to a DVD player with component video (such as a Toshiba You can connect component video cables ® DVD player with ColorStream ) can greatly enhance picture quality from the DVD player to either ColorStream and realism.
Connecting a DTV receiver/set-top box with ® ColorStream (component video) and a VCR This connection allows you to watch DTV (digital TV broadcast), Note: VCR, and TV programs, and record DTV and TV programs. You can For the highest possible picture quality, use record from one source while watching a program from another component video cables (or a DVI-D digital single-link cable) between the TV and DTV...
Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You also can record one channel while watching another channel. You will need: • two coaxial cables • two sets of standard A/V cables VCR1 VIDEO AUDIO...
Connecting a device to the DVI/HDCP input The DVI/HDCP input on your TV is designed to accept HDCP Notes program material in digital form from EIA/CEA-861–compliant DVI/HDCP = Digital Visual Interface/ consumer electronic devices, such as a set-top box or DVD player High-bandwidth Digital Content Protection.
TV.) ___________ *The IR blaster OUT function has been verified for use with Toshiba infrared-controlled devices. The IR blaster IN function has been verified for use with SmarTouch™ STS/STS-C wireless RF control systems. Due to the wide variation in remote control operation among manufacturers, these functions may or may not operate with other brands.
Connecting an audio system Amplifier This connection allows you to use an audio amplifier to adjust the audio level. This also allows you to use external speakers. LINE IN To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers (see “Turning off the built-in speakers”...
Preparing the remote control for use Note: Your TV’s remote control may not operate Your Toshiba TV remote control has one dedicated TV mode and five certain features on your VCR, cable TV universal modes: VCR, Cable/SAT, DVD, Audio1, and Audio2. The converter, or other electronic device.
Programming the remote control for use with your audio/video devices Note: Device code setup • Every time you replace the batteries, you must reprogram the remote control. 1. Refer to the Device code table on pages 22–23 to find the code •...
Using the volume lock feature (8000) For the TV, CABLE/SAT, VCR, and DVD modes, the volume controls (VOL yz and MUTE) can be programmed (locked) to the selected device mode. This feature does not apply to the AUDIO1/2 modes. Number For example, to lock the volume controls to always jump to the MODE CABLE/SAT mode:...
Learning about the remote control The buttons used for operating the TV only are described here. For a complete list of the remote control’s functions, see the “Remote Control functional key chart” on pages 18–19. turns the TV on and off POWER allows access to the sleep timer (automatic TV shut-off) function SLEEP...
Note Regarding Setting up your TV Quick Connect Guide The Quick Connect Guide Learning about the menu system automatically appears on-screen After you have installed the batteries and programmed the remote the first time the TV is turned on. control, you will need to set some preferences on the TV using the This feature provides on-screen menu system.
Using the Quick Connect Guide The Quick Connect Guide automatically starts the first time the TV Note: is turned on. This feature provides on-screen instructions to guide you To stop the Quick Connect Guide, press EXIT through initial setup of your TV. or turn off the TV.
Changing the on-screen display language You can choose from three different languages (English, French and Spanish) for the on-screen display of adjustment menus and messages. To select a language: 1. Press MENU, and then press x or • until the SET UP menu appears.
Adding channels to the TV’s memory When you press Channel y or z, your TV will stop only on the Note: channels stored in the TV’s channel memory. To tune the TV to a channel not programmed in the channel memory, you must use the Follow the steps below and on the next page to program all active Channel Number buttons on the remote channels into the TV’s memory.
Adding and erasing channels manually After you have programmed the channels automatically, you can x •zy manually add or erase specific channels. To add or erase channels: 1. Select the channel you want to add or erase. If you are adding a TOUCH MENU VOLUME...
Adjusting the color convergence This projection TV uses three separate TV tubes: red, green, and blue. The red, green, and blue images are projected onto the screen where they converge to form a full-color picture. You can see a clear picture TOUCH MENU VOLUME...
Page 31
3. Press x or • to display the Center Convergence menu. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Number B L U E TO ADJUST ENTER TO SELECT COLOR...
Using the TV’s features Adjusting the channel settings Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. To switch between two channels: 1. Select the first channel or video mode you want to view. Channel Number 2.
Viewing the wide-screen picture formats You can view programs in a variety of picture sizes. If you are viewing a wide-screen (16:9 aspect ratio) format program, Natural picture size is the recommended mode (see below). If you are viewing a conventional (4:3 aspect ratio) format program, you can select one of the following picture sizes, depending on your PIC SIZE preference;...
Page 36
(Continued from previous page) Theater Wide 1 picture size Note: (recommended for conventional 4:3 format pictures) Press PIC SIZE on the remote control to select the picture size. • The picture is non-uniformly enlarged—the center of the picture remains close to its true proportion, but the left and right edges are stretched wider to fill the screen.
Scrolling the Theater Wide picture (Theater Wide 2 and 3 picture sizes only) 1. Press PIC SIZE to select either Theater Wide 2 or 3 mode. 2. Press MENU, and then press x or • until the THEATER menu appears. 3.
Using the POP double-window feature Note: • The PIP buttons on the remote control The POP (picture-out-picture) feature splits the screen into a double operate the TV’s POP features. window that allows you to watch two programs at the same time. The •...
Switching the main and POP pictures Press SWAP while you are using the POP feature to switch the main and POP pictures. FAVORITE ENTER Freezing the POP picture Press STILL while you are using the POP feature. The POP picture yzx •...
Using the LOCKS menu Note: The V-Chip function is available only for the The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and U.S. V-Chip system. The Canadian V-Chip New PIN Code functions. You can use these functions after entering system is not supported.
Using the V-CHIP menu Note: The V-Chip function is available only for the Some TV programs and movies include signals that classify the U.S. V-Chip system. The Canadian V-Chip content of the program (violence, sex, dialog, language). The V-CHIP system is not supported. control feature in this TV detects the signals and blocks the programs according to your selections.
MPAA RATING (Independent rating system for movies) 1. From the LOCKS menu, select MPAA RATING. LOCKS menu 2. Press x or • to display the MPAA RATING menu, and then 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 press z or y to highlight MPAA RATING.
Unlocking programs temporarily 1. If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. After 4 seconds, the TV starts the favorite channel search function (see page 39). You NOTICE OF POSSIBLE ADVERSE can either unlock the program temporarily (see steps 2–4) or EFFECTS ON TV PICTURE TUBE...
Using the front panel lock feature Lock the front panel buttons to prevent the buttons from being pressed accidentally (by children, for example). When the front panel TOUCH POWER MENU VOLUME CHANNEL EXIT TV/VIDEO FOCUS lock is in ON mode, all control buttons on the TV front panel (except POWER) do not operate.
Adjusting the picture Selecting the picture mode Note: You can select from four picture modes: Sports, Standard, Movie, and If you select one of the factory-set picture Preference. modes (SPORTS, STANDARDS, or MOVIE) and then change a picture quality setting (for Mode Picture Quality example, increase the contrast), the picture...
Saving your new preferences You can save your PICTURE quality adjustments (contrast, brightness, color, tint, and sharpness) in the PICTURE menu PREFERENCE MODE. To save your new preferences: 1. Press MENU, and then press x or • until the PICTURE menu appears.
Using CableClear™ DNR (digital noise reduction) This feature allows you to reduce visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal or playing back a video cassette or disc damaged by repeated use. ™...
Selecting the color temperature You can change the quality of the picture by selecting from three preset color temperatures: cool, medium, and warm. Mode Picture Quality cool blueish medium neutral warm reddish To select the color temperature: 1. Press MENU, and then press x or • until the PICTURE menu MENU appears.
Selecting the video input source Press INPUT on the remote control or TV/VIDEO on the TV to view Note: a signal coming from another device connected to your TV, such as • When ColorStream HD1/HD2 or DVI is selected, the video OUT jack does not a VCR or video disc player (see illustrations below).
Using the closed caption feature The closed caption feature has two options: • Captions—An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as “CC” in TV listings). • Text—An on-screen display of information not related to the current program, such as weather or stock data (when provided by individual stations).
Setting the sleep timer Note : To set the sleep timer to turn the TV off automatically: To display the amount of time left until the TV 1. Press SLEEP to set the length of time until the TV turns off. turns off automatically, press SLEEP once.
Adjusting the sound Muting the sound Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE) the sound. While the sound is off, the screen will display “1/2 MUTE” or “MUTE” in the lower right corner. Every time you press the button, the mute mode will change in the following order.
Using the WOW™ surround sound feature The WOW™ surround sound feature expands the audio listening Note: field wider and deeper to create exceptional sound quality from the If the broadcast is monaural, the SRS 3D effect does not work. TV’s speakers. WOW consists of three features—SRS 3D, FOCUS and TruBass—that use stereo signals from a TV broadcast or video input.
Resetting your audio adjustments The RESET function returns your audio adjustments to the following factory settings: Bass ....center (50) Treble ....center (50) Balance .... center (0) To reset your audio adjustments: 1. Press MENU, and then press x or • until the AUDIO menu appears.
Turning off the built-in speakers Use this feature to turn the TV speakers off when you connect an Note: audio system (see “Connecting an audio system” on page 16). Make sure the volume control of your audio amplifier is set to a moderate listening level. To turn off the built-in speakers: 1.
Using the StableSound ® feature When the signal source is changed, the StableSound ® feature limits the highest volume level to prevent extreme changes in volume (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial). To turn on the StableSound ®...
Viewing the demonstration mode The demonstration mode is an option available in the MENU button on the TV front panel that will demonstrate several of your TV’s features. To start the demo: Press and hold MENU on the TV for 4 seconds. To stop the demo: Press RECALL, EXIT, or POWER.
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem Solution TV will not turn on • Make sure the power cord is plugged in, then press POWER. •...
EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH (3) The warranties from TACP and THI are effective only if the CIRCUMSTANCES. television is purchased and operated in the U.S.A. or Puerto ® FST PURE is a registered trademark of Toshiba America Consumer Products, Inc. Rico. REV. MAR02...
(3) The warranties from TCL are effective only if the television is LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU purchased in Canada from an authorized TCL dealer and UNDER SUCH CIRCUMSTANCES. operated in Canada. FST PURE ® is a registered trademark of Toshiba America Consumer Products, Inc. REV. MAR02...
Index Picture adjustments COLOR TEMPERATURE ..........49 FLESH TONE ..............47 Picture mode ..............46 A/V receiver connection ........... 16 Picture quality ..............46 ANT 1/2 ................... 27 Picture-out-picture (POP) Antenna cables ..............8 PIP button ................38 Audio cables ................8 PIP CH yz buttons ............38 AUDIO OUT sound, selecting ........
Page 64
VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C. V6W 1J5, CANADA TEL: (604) 303-2500 MANUFACTURED BY ColorStream and StableSound are registered trademarks of Toshiba America Consumer Products. CableClear, SurfLock, and TouchFocus are trademarks of Toshiba America Consumer Products, Inc. PRINTED IN USA (02-07) R...