Wireless Communication Switch
( Wireless LAN model only )
1.
To enable Wireless module, make sure the Wireless Communica-
tion Switch is turned on. (The default setting is Power Off. Press the
switch to the left to turn the power on.)
2.
Wireless LAN model only: If this is your first time turning on the
switch, the IP Address Page will pop up for you to set the IP address,
Subnet mask and Default gateway.
LED Descriptions
LED indicates the different status:
LED
Off
Orange
WIRELESS COMMUNICATION
SWITCH
Status
Wireless Communication Switch is turned OFF
Wireless Communication Switch is turned ON
Chapter 2: Basic Skills
21