Toshiba e755 User Manual page 10

Working environment
This product was designed to fulfill the EMC (electromagnetic compatibil-
ity) requirements for "residential, commercial and light industry environ-
ments".
Toshiba does not approve the use of this product in working environ-
ments other than "residential, commercial and light industry environ-
ments".
For example, the following environments are not approved:
• Industrial Environments (environments with a main voltage >230V~)
• Medical Environments
• Automotive Environments
• Aircraft Environments
Any consequences resulting from the use of this product in working envi-
ronments that are not approved are not the responsibility of Toshiba Cor-
poration.
The consequences of the use of this product in non-approved working
environments may be:
• Interference with other devices or machines in the nearby surround-
ing area
• Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the nearby surrounding area
Therefore Toshiba strongly recommends that the electromagnetic com-
patibility of this product be suitably tested in all non-approved working
environments before use. In the case of automobiles or aircraft, the manu-
facturer or airline respectively should be asked for permission before use
of this product.
Furthermore, for general safety reasons, the use of this product in envi-
ronments with explosive atmospheres is not permitted.
CE compliance
This product and the original options are designed to observe the related
EMC (Electromagnetic compatibility) and safety standards. However,
Toshiba cannot guarantee that this product still observes these EMC
standards if options or cables not produced by Toshiba are connected or
implemented. In this case the persons who have connected / imple-
mented those options / cables have to make sure that the system (PC
plus options / cables) still fulfils the required standards. To avoid general
EMC problems, the following advice should be observed:
• Only CE marked options should be connected / implemented
• Only best shielded cables should be connected
10