Toshiba e755 User Manual page 162

You can project an individual slide to the VGA output by activating the VGA
Slide Toggle command on the View Menu, or by tapping the VGA Slide
Output Toggle icon at the rightmost side of the Toolbar. When you activate
this function:
• If one slide is selected at the time you toggle the VGA Slide Out-
put "on," that slide will be output to the VGA Display.
• If multiple slides happen to be selected, the first selected slide in
the sequence will be output to the VGA Display.
• If no slides are selected, there is no change to the current status
of the VGA Display. That is, if an image is already displayed on
the VGA Display, that image remains until you select a slide on
your LCD screen for projection.
To end the projection and return to viewing the slide only on your mobile
device's screen, just select the command again (or tap the icon a second
time) to toggle it off.
Indicator Icons under Thumbnails
Under each thumbnail in Slide Sorter view mode, there may be various
small icons displayed which indicate the status/attributes of the slide, as
follows:
- The transition icon indicates that a transition effect has been asso-
ciated with the slide, and tapping the icon will "demo" the transition
effect.
- The shape icon indicates that the slide contains animated shapes.
- If you assigned a transition delay-time to the slide in the Automati-
cally field of the Edit Menu > Slide Transition... screen, the delay-
time will be shown.
- The slide number is always shown at the right. If the slide has been
hidden using the Hide Slide command on the Edit Menu, the slide
number will be enclosed in a red box with a line crossing it out.
Chapter 10: Optional Functions
163