C Autions; Connecting With External Equipment - Orion LB2000 Instruction Manual

CONNECTING WITH EXTERNAL
EQUIPMENT
C A U T I O N
C A U T I O N
Be sure to turn off the power of your computer before connecting the monitor.
1. CONNECT THE VIDEO SIGNAL CABLE
A. Connect one end of the signal cable to the back panel of the monitor
and connect the other end to the graphic card on back of the computer.
B. Secure the connection with the screws on the plug.
2. CONNECT THE POWER CORD
Connect the female end of the power cord to the power input
receptacle on the LCD Monitor.
Then, plug the male end of the power cord to an AC outlet or computer.
3. CONNECT THE A/V CABLE
A. Connect the end of RCA(Yellow, White, Red) SCART or S-VHS cable to
the terminals on the back of the Monitor.
B. Connect an antenna or CATV cable to the terminal on the back of the Monitor.
(Optional TV Tuner can be purchased from the dealer)
C. Connect one end of stereo audio cable to the stereo jack on the back of the Monitor.
(Connect another end of stereo audio cable to the "Audio(Line) out" terminal of
the sound card on your computer or another audio equipment)
D. Headphone may be connected to the headphone jack(option) on the left-hand side
of the Monitor.(While Headphone is connected, the sound from the built-in speaker
will be disabled)
4. TURN THIS MONITOR ON AND START YOUR SYSTEM
5. CONNECT THE TUNER(OPTION)
INSTRUCTION MANUAL 6