Reliability Data - Delta DRP024V480W1B Series Technical Data Sheet

Cliq ii din rail power supply
Table of Contents

Advertisement

TECHNICAL DATASHEET
CliQ II DIN Rail Power Supply
24V 480W 1 Phase / DRP024V480W1B

Reliability Data

MTBF
Expected Cap Life Time
Safety Standards / Directives
Electrical Equipment of Machines
Electrical Equipment for Use in Electrical Power Installations
Safety Entry Low Voltage
Electrical Safety
Industrial Control Equipment
Hazardous Location / ATEX
(For DRP024V480W1BA)
CE
Galvanic Isolation
*Output must be earthed in the final unit in order to comply with PELV requirements according to standard EN 60204-1.
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
4
www.DeltaPSU.com (November 2020, Rev. 07)
> 500,000 hrs. as per Telcordia SR-332
I/P: 115Vac, O/P: 100% load, Ta: 25°C
10 years (115Vac & 230Vac, 50% load @ 40°C)
EN 60204-1 (over voltage category III)
IEC/EN 62477-1 / IEC 62103
PELV* (EN 60204-1), SELV (EN 60950-1)
SIQ Bauart
EN 60950-1, EN 62368-1
UL/cUL recognized
UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395)
UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)
CB Scheme
IEC 60950-1, IEC 62368-1
UL/cUL listed
UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)
CSA
CSA C22.2 No. 107.1-01 (File No. 181564)
cCSAus
CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2007
[Class I, Division 2, Group A, B, C, D T4, Ta= -25°C to +75°C
(Vertical: > +50°C derating)]
ATEX
EN 60079-0:2009, EN 60079-15:2010 [
T4 Gc, Ta= -25°C to +75°C (Vertical: > +50°C derating)]
Certificate No. EPS 12 ATEX 1 491 X
In conformance with EMC Directive 2014/30/EU and
Low Voltage Directive 2014/35/EU
For DRP024V480W1BA:
In conformance with Equipment for explosive atmospheres
(ATEX) directive 2014/34/EU
Input to Output
4.0KVac
Input to Ground
1.5KVac
Output to Ground
1.5KVac
II 3G Ex nA nC IIC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Drp024v480w1bn

Table of Contents