Network Environment; Introducing Useful Network Programs; Using A Wired Network - Samsung CLP-320K User Manual

network setup
3.
(clp-320n(k)/clp-321n/clp-325w(k) only)
This chapter gives you step-by-step instructions for setting up the network connected machine and software.
This chapter includes:
•

Network environment

•

Introducing useful network programs

NETWORK ENVIRONMENT
You need to set up the network protocols on the machine to use it as your
network machine. You can set up the basic network settings through the
machine's control panel.
The following table shows the network environments supported by the
machine:
ITEM
Network interface
Network operating system
Network protocols
Wireless security
INTRODUCING USEFUL NETWORK PROGRAMS
There are several programs available to setup the network settings easily in
network environment. For the network administrator especially, managing
several machines on the network is possible.
Before using the programs below, set the IP address first.
SyncThru™ Web Service
Web server embedded on your network machine, which allows you to:
REQUIREMENTS
• Ethernet 10/100 Base-TX
• Network Interface 802.11 b/g/n wireless
LAN (CLP-325W(K) only)
• Windows 2000/Server 2003 /Server
2008/XP/Vista/7/Server 2008 R2
• Various Linux OS
• Mac OS X 10.3 ~ 10.6
• TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR,
IPP
• SNMPv 1/2/3, HTTP, IPSec
• TCP/IPv6 (DHCP, DNS, RAW, LPR,
SNMPv 1/2/3, HTTP, IPSec)
See "IPv6 configuration" on page 32.
• Authentication: Open System, Shared
Key, WPA Personal, WPA2 Personal
(PSK)
• Encryption: WEP64, WEP128, TKIP,
AES
Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K) only)_ 30
•

Using a wired network

• Installing network connected machine's driver
• Configure the network parameters necessary for the machine to connect
to various network environments.
• Customize machine settings.
See "Using SyncThru™ Web Service" on page 65.
SetIP
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol.
• See "IPv4 setting using SetIP Program (Windows)" on page 31.
• See "IPv4 setting using SetIP Program (Macintosh)" on page 31.
• See "IPv4 setting using SetIP Program (Linux)" on page 32.
TCP/IPv6 is not supported by this program.
USING A WIRED NETWORK
You must set up the network protocols on your machine to use it on your
network. This chapter will show you how this is easily accomplished.
You can use network after connecting network cable to a corresponding
port on your machine.
Printing network configuration report
You can print a Network Configuration Report from the machine's control
panel that will show the current machine's network settings. This will help
you to set up a network and troubleshoot problems.
To print the report:
In ready mode, press and hold the
You can find your machine's MAC address and IP address.
For example:
• MAC Address: 00:15:99:41:A2:78
• IP Address: 192.0.0.192
(cancel button) for about 5 seconds.