Saeco 10002684 Operating And Maintenance Manual page 37

34 prograMMIng The MaChIne
In order to run a descaling cycle before the machine indicates the necessity to do so, press the "descaling cycle" icon
and then "start descaling".
start
descaling
descaling
cycle
2
descaling cycle
please wait
insert the water tank
with fresh water
When the solution is fi nished the
following message appears on the
display:
5
descaling cycle
please wait
rinsing...
pause
rinsing
the machine performs the rinse cycle.
At the end of the rinse cycle fi ll the
tank with fresh drinking water. Before
fi lling the tank the water fi lter (if
desired) or the small white fi lter (see
page 7).
When descaling is complete, perform a cleaning and maintenance cycle on the milk container as described on page 41-42.
1
descaling cycle
please wait
descaling...
pause
descaling
The machine begins to dispense the descaling solution through the hot
water spout. The dispensing occurs at preestablished intervals, in order to
allow the solution to be more effective.
3
Remove the water tank and rinse
with fresh drinking water to eliminate
traces of descaling solution.
Then, refi ll with fresh drinking water
and reinsert water tank.
6
Put a container under the water spout.
When the water tank is inserted the
machine automatically proceeds to prime
the water circuit. If this operation is not
successful, see the "manual priming of
the water circuit" section (page 6).
4
descaling cycle
please wait
rinsing
ciclo di risciacquo
cycle
start
rinsing
Rinse the machine circuits by
pressing "start rinsing".