Advertisement
BEFORE USING YOUR TRIMMER
NOTE: This product is not suitable for use in the bath or shower. The
cutter assembly can only be rinsed with water once it is removed from
the main trimmer.
•
The hair that you intend to trim should be dry. Avoid using lotions before using
your trimmer.
•
Be certain the trimmer comb is at the desired setting. When first using, you
may want to begin on a higher setting - #5 (longest hair setting) – to prevent
trimming off too much hair initially.
•
For first time use, insert 2 `AAA' ALKALINE batteries.
•
Clean the cutter blades regularly – refer to Cleaning and Maintaining section.
•
Never use the trimmer with a damaged or broken cutter unit.
BATTERIES
Your Trimmer requires 2 `AAA' ALKALINE batteries.
•
To install the batteries, be sure that the trimmer is turned off.
•
Hold the trimmer, with the battery compartment towards you. Open the battery
compartment door by pressing its tab in towards the door. Lift the door to gain
access to the battery compartment.
•
Insert the batteries so that the (+) and (-) marks on the batteries face the same
marks in the battery compartment.
•
Replace the battery cover by inserting the end opposite to the tab and then
press on the tab until it clicks into place.
Note: The Trimmer will not operate if the batteries are inserted incorrectly.
Note: The battery cover will fit only one way. If the cover does not go on
correctly, turn it around.
HAIR LENGTH SELECTOR AND REMOVABLE TRIMMER COMB
ATTACHMENT
The Trimmer Comb must be attached to the Trimmer in order to use the hair length
selector.
The hair length selector and adjustable trimmer comb attachment ensures precise
trimming and has five adjustable positions:
SETTINGS
1
2
3
4
5
HAIR LENGTH
4
3mm
5mm
7mm
9mm
12mm
Advertisement
