Onkyo TX-NR696-S Instruction Manual page 111

Inputting Characters
You can input characters or symbols on the keyboard displayed on the TV screen
such as when inputting a password for Wi-Fi Setup (
preset radio station ( p125).
1. Select a character or symbol with the cursors
controller and press the ENTER button.
2. When saving characters after input, select "OK" and press the ENTER button.
, , . . ; ;
/
/ / /
ENTER
p128) or naming a
/ / / on the remote
: :
]
CLEAR
MODE
ZONE 2
SHIFT
Contents Connections
≫
• Select "A/a" to switch between upper and lower cases. (Can also be switched
with the MODE button on the remote controller.)
• To enter a space, select " ".
• To delete a character on the left of the cursor, select " ".
• To delete all the input characters, press the CLEAR button on the remote
control.
• On the ZONE 2 playback screen, operate the remote controller while pressing
and holding the ZONE 2 SHIFT button. To delete all the input characters, only
press the CLEAR button without pressing the ZONE 2 SHIFT button.
111
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫