Note
•
If the link is not established after 80 seconds, move the
transmitter, receiver and HDTV closer to each other.
The maximum transmission range is up to 7 meters
without obstruction between the transmitter and
receiver.
•
If more than one set of Philips Wireless HD Net
Connect is placed in the same room, make sure that
the minimum distance among each one is 2 meters.
•
Make sure the computer is on and switched the signal
output to the HDMI.
•
Make sure the video format is supported before the
video is displayed, see the chapter on Technical data for
information.
On screen display on HDTV
On screen display
.....
x and
....
HDMI CH1
HDMI CH1
HDMI CH1 1080P On mode with
EN
10
Mode and status
Standby mode: it is a
power-saving mode
Start up in progress: It
takes 15-20 seconds.
Searching available
channels: It occurs
when the link cannot
establish over
80 seconds after
initialization.
On mode with
unrecognized video
format
On mode but
without input from
the computer/source
device
recognized video
format