Advertisement
2
Enjoy
Turn on the power of your HDTV
1
Go to the source menu under the settings
menu of your HDTV.
2
Select the HDMI input to which the
receiver is connected.
Activate the wireless link
Switch on the transmitter and receiver.
When there is power supply for the transmitter
and receiver, they are on automatically.
» The link between the transmitter and
receiver is established (within 15-20
seconds).
Mount your receiver
You can either mount the receiver on the wall
or on the back of the HDTV.
Mount your receiver on the wall
1
Select a spot near the HDTV.
2
Drill two holes in the wall. Make sure
that the distance between the two holes
is 45mm and the diameter of the hole is
5 mm.
3
Punch the supplied two anchors into the
two holes on the wall.
4
Put the two screws into the anchors and
leave 3 mm to mount the receiver on.
5
Hook the key holes at the back of the
receiver on the screws.
HDMI
HDMI
Advertisement
