Advertisement
Mount your receiver on the back of
the HDTV
1
Remove the white protective film from
one of the supplied adhesive tapes.
2
Secure the glued side of the adhesive tape
and attach it to the central bottom area of
the receiver.
3
Select a flat location on the rear side of
the HDTV.
4
Remove the white protective film from
the other adhesive tape.
5
Secure the glued side of the adhesive tape
and attach it to the selected rear side of
the HDTV.
6
Align the adhesive tape on the receiver
with the one on the HDTV until both the
receiver and HDTV are mounted together
firmly.
Troubleshooting
There is no video displayed on my TV screen.
•
Make sure that the appropriate cables are selected and inserted to the transmitter, receiver,
and HDTV.
•
Make sure that you select HDMI as the input source on your HDTV.
•
Check the power LED and status LED on the receiver.
I cannot hear any sound or the sound is poor, what do I do?
•
Make sure that the TV volume is adjusted correctly.
•
Make sure that the TV volume is not set to minimum or the sound is not muted.
•
Make sure that the audio volume of your computer is turned up.
•
Make sure that the audio bit rate is supported.
•
Make sure that the audio output of your computer is set to HDMI output.
Advertisement
