Troubleshooting
Problem
Tip
•
No image or
wrong image on
•
TV1
•
•
•
•
No image or
wrong image on
•
TV2
•
•
•
•
•
•
Make sure video source is con-
nected to the transmitter (A).
Make sure the transmitter (A) is
connected to TV1.
Make sure SCART cables are
firmly inserted.
Make sure the video source is
switched on.
Make sure the correct SCART
input on TV1 is selected.
Make sure SCART cables are
firmly inserted.
Make sure the receiver (B) is con-
nected to TV2.
Make sure both receiver (B) and
transmitter (A) are switched on.
Make sure the video source is
switched on.
Make sure the correct SCART
input on TV2 is selected.
If the video source gives proper
image on TV1:
Make sure the video source gives
video signal in CVBS mode. See
its user manual
Change the wireless channel that
is used for communication. See
page 7.
The receiver (B) is out of range of
the transmitter (A). The number
of walls and ceilings in between
the receiver (B) and transmitter
(A) restrict the distance.
EN
9