Replacing The Assy Door Latch - Samsung NX58R4311SS Service Manual

3. Disassembly and Reassembly

3-7 Replacing the Assy Door Latch

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range. Replace all panels before operating range. Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Assy Tube-
ASSY BRACKET-B URNER BOX
Manifold
Assy Door
Latch
Bracket-Latch sub
This document can not be used without Samsung's authorization.
Explanation Photo
ASSY Door Latch
19
Explanation
1. Turn off the electrical supply going to
the range.
2. Shut off the gas shut-off valve in the
gas supply line to the range.
3. Remove the oven door and the
cooktop.
4. Remove the control knob and the
chassis manifold panel.
5. Remove the ASSY tube-manifold using
a tubing wrench.
6. Remove 2 screws from the Bracket-
Latch sub to the rear of the range.
7. Disconnect wires of the door latch to
the rear of the range and remove it.
8. Remove 2 screws holding the Assy
bracket-latch rear to the rear of the
range.
9. Remove the latch-rod from the Assy
bracket-latch front.
10. Remove 2 screws holding the Assy
bracket-latch front to the front of cavity.
11. Reverse the order to install the ASSY
DOOR LATCH.
12. Test the ASSY DOOR LATCH to
make sure it is latching and unlatching
properly.