Table of Contents
Advertisement
Note: Connecting to 2G networks slows the data transfer
speed and time.
Default setup options
Your phone default is set to Automatic (to automatically
search for an available network. You can set this option to
Manual to select a network each time you connect.
1. From the Home screen, tap
Connections
More networks
2. Tap Network operators.
3. Tap Default setup.
4. Tap Manual to locate and connect to a network
manually, or tap Automatic to allow the device to
automatically select a network.
Tethering & portable hotspot
This option allows you to share your phones's mobile data
connection via USB or as a portable Wi-Fi hotspot.
USB tethering
1. From the Home screen, tap
Connections
More networks
portable hotspot.
123
Settings
Mobile networks.
Settings
Tethering and
2. Connect your phone to your PC using a USB cable.
3. Tap USB tethering to add a checkmark and activate the
feature. The USB tethering icon
top of your screen.
Mobile Hotspot
Note: To enable Mobile Hotspot on your phone, dial 611 or go
to
att.com/mywireless
1. From the Home screen, tap
.
– or –
From the Home screen, tap
Connections
More networks
portable hotspots
2. Turn Mobile Hotspot on by tapping the slider so that it
changes to the ON position
The Mobile Hotspot icon
your screen.
3. Tap Configure at the bottom of the screen.
is displayed at the
to set up the service.
Mobile Hotspot
Settings
Tethering and
Mobile Hotspot.
.
is displayed at the top of
Advertisement
Table of Contents
