Sagem OT8X0 Series Manual page 37

Table of Contents

Pairing procedure

Select Paired devices/New device.

If the Bluetooth

function is not active, the phone prompts you to activate it using one of the 3 modes described above.

The phone searches for visible Bluetooth

choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device.

Enter and validate this code: Your phone is now paired with the remote device.

A connected device is displayed in blue in the list.

[Options] on the name of a device lets you access the following options:

Delete: lets you delete the device. WARNING: you need to restart the pairing when this function is used.

Rename: lets you modify the device name.

Delete all: lets you delete all your devices. WARNING: you need to restart the pairing when this function is used.

Activate: used to activate the connection with the device.

Deactivate: used to deactivate the connection with the device.

Properties: used to display the device's list of Bluetooth

Notes:

Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing

this operation.

The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this

device to find out this code.

Bluetooth name

This is the name used to identify your phone when it is detected by another Bluetooth

USB mode

This menu lets you select a mode for connecting the phone to a PC using a USB cable available as an accessory:

At Plugging-in

If you select this option, on connecting a USB cable the phone will prompt you to select the required mode.

Modem

This mode is a communication mode between the phone and a PC. It is used to exchange data (my card, contacts) between

the phone and a PC.

After connecting the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds

available from www.planetsagem.com) or the Wellphone software (available from www.wellphone.com).

PictBridge

This mode lets you connect the phone to a printer (and print photos) without using a PC.

Settings

devices and displays the list. Select the device concerned and validate your

services.

device.

Table of Contents