Table of Contents
Advertisement
If your 802.11n Wireless LAN USB Card performs as enrollee, choose ¡Join a WLAN (Enrollee)¡
and click on Next.
You will have two methods to join a WPS-enabled AP.
Push Button on AP: Push the button on the Access Point and then click
on the client
utility to start WPS link within 2 minutes. If WPS link is established successful, it will display the
success message.
Instead of Push Button on AP, you may use XN-721¡s hardware push button to establish WPS link
as well.
Push the button on the Access Point and press PBC button on the client to start WPS
link within 2 minutes. If WPS link is established successful, it will display the success message
figured below.
Furthermore, there are two options for connecting to the WPS-enabled AP, one is that the Utility
will find any available WPS-AP on the network by checking the Automatically select the
network checkbox.
45
Advertisement
Table of Contents
