ActionTec 802AIN User Manual page 41

Link Test:
The Link Test menu provides a suite of test s which you can run to identif y the connection
between your computer and the wireless network.
Enter the IP Address of Access Point which you desire to connect. The settings following the
address allow you to setup the number and size of packets being transmitted between your
computer and the wireless network. Furthermore, clicking the check box Continuous Linktest
ignores number of packets you set. On the bottom of this menu provides current and cumulative
counters of the activity on your wireless network. The counters of packets turn to 0 once you click
on the Start button.
Site Survey:
Use the Site Survey function to scan available wireless Access Points on your network. You
may click on the Rescan button to enforce the utility to scan Access Points around the
environment. Besides showing the ESSID of each Access Point, it also displays wireless network
mode and signal strength. To join any of the displayed Access Points, highlight the Access Point
you desire to connect and then click Join.
41