Table of Contents
Advertisement
Chapter 1. Safety
Cleaning
Exercise care when cleaning as the panel and exterior of advanced mirror glass are
easily scratched.
Take the following steps when cleaning.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
‒ Hold the power cable by the plug and do not touch the cable with wet hands.
Otherwise, an electric shock may result.
3
Wet a soft and dry cloth in water and wring thoroughly.
‒ Do not use detergents that contain alcohol, solvent or surface-active agents.
‒ Do not spray water or detergent directly on the product.
4
Wipe the product with a clean, soft and dry cloth.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
Cleaning the mirror glass
Usable cleaning cloth
• Superfine fibers (Provided accessory: CLOTH-
(Material)
CLEAN(BN63-01798B))
• 100% cotton
Cleaning solution
Water
Cleaning method
Clean with wet cloth first
and then wipe with dry
cloth
Status after cleaning
All fingerprints and stains are gone
Deformation or
No
alteration of the glass
Precautions when handling the panel
Do not stand the product upright on the floor. The panel is fragile and can get
damaged.
Lay the product down to handle it (the packaging can be used).
Ensure you use the handles on the back when moving the product.
Do not hold or grasp any area of the product within 15 mm from the front.
None
Wipe with dry cloth
No
9
Advertisement
Table of Contents
