Table of Contents
Advertisement
Chapter 4. Remote control
System ▼
2nd
3rd
Clock Set
DST
Sleep Timer
Power On Delay
Auto Source Switching
Auto Source Switching
Primary Source Recovery
Primary Source
Secondary Source
Power Control
Auto Power On
Description
Select
Clock
Set. Select
Date
or Time, and then press
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow
buttons to move from one entry field to the next. Press
• You can set the Date and Time directly by pressing the number buttons on the remote control.
Switches the DST (Daylight Saving Time) function on or off.
Automatically shuts off the product after a preset period of time.
• Use the up and down arrows to select a period of time, and then press
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
the range 0–50 seconds).
Turning on the display with
Auto Source Switching
display will automatically search the different video input sources for active video.
When the
Auto Source Switching
is On, the display video source will automatically be searched for active video.
The
Primary Source
selection will be activated, if the current video source is not recognized.
Secondary Source
selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the first video source and display a message indicating that there is no signal.
When the
Primary Source
selection is set to All, the display will search all the video source inputs twice in sequence
looking for an active video source, returning back to the first video source in the sequence if no video is found.
Select whether to restore the selected primary input source when a primary input source is connected.
• The
Primary Source Recovery
function is disabled if
Specify
Primary Source
for the automatic input source.
Specify
Secondary Source
for the automatic input source.
• The
Secondary Source Recovery
function is disabled if
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
.
when done.
. To cancel
Sleep
On, and the previous video source selection is not active, the
Primary Source
is set to All.
Primary Source
is set to All.
76
Timer, select Off.
Advertisement
Table of Contents
