Table of Contents
Advertisement
Chapter 2. Hardware
Connection using an IR Stereo cable (sold separately)
• The appearance may differ depending on the product.
Make sure to connect the external sensor kit while the product is powered off. Then,
power on the product.
Controlling more than one display product using your remote control
• Connect the IR OUT port on the product to the IR IN port on the other display
product using the dedicated stereo cable.
• A command sent from the remote control pointed at product
both display products
and
.
1
2
1
IR OUT
will be received by
1
2
IR IN
Controlling more than one display product using an external sensor kit
• A command sent from the remote control pointed at product
external sensor kit is connected) will be received by both display products
.
2
IR IN
IR OUT
19
(to which the
1
and
1
1
2
IR IN
Advertisement
Table of Contents
