Fireplace Burner Installation - Cal Flame FRP-910-3 Owner's Manual

Fireplace Burner Installation

This procedure describes how to access the gas lines for installation.
Gas installation should be performed by a qualified contractor.
1. Remove the burner from
the hearth. It is not con-
nected and will lift out
easily.
2. Remove the right side refractory wall from the fireplace by remov-
ing one screw.
3. Connect the flex line to
the burner.
Fireplace Owner's Manual
LTR50001006, Rev. P
www.cal amebbq.com
13