Installation / Assembly - Cal Flame FRP-910-3 Owner's Manual

Installation / Assembly

Most cities and counties require permits for exterior construction and
electrical circuits. In addition, some communities have codes requiring
residential barriers such as fencing and/or self-closing gates on prop-
erty to prevent unsupervised access to the property by children under
the age of 5. Your dealer can provide information on which permits
may be required and how to obtain them prior to the delivery of your
equipment.
Installation and service must be performed by a quali-
fied installer, service agency or your natural gas or liquid
propane gas provider .
Set-Up
You are responsible for ensuring that a natural gas line (if required)
is installed and safe for use. We recommend that a licensed contrac-
tor install your fireplace. Installation must conform to local codes, or
in the absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1 / NFPA54, Natural Gas and Propane Installa-
tion Code, CSA B149.1, or Propane Storage and Handling Code,
B149.2), as applicable.
To prevent fire and smoke damage, remove all packaging material be-
fore operating the fireplace.
WARNING! Proposition 65 Warning: Handling the brass
material on this product exposes you to lead, a chemical
known to the State of California to cause cancer, birth
defects or other reproductive harm. (Wash hands after
handling this product.)
This product and the fuels used to operate this product
(propane or natural gas), and the products of combus-
tion of such fuels, can expose you to chemicals includ-
ing Benzene, which is known to the state of California
to cause cancer and birth defects or reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Fireplace Owner's Manual
LTR50001006, Rev. P
www.cal amebbq.com
5