Environmental Protection; Maintenance - Ryobi RVC1218P-P Owner's Operating Manual

Insert the large end of the hose into the blower
connection in the top of the motor housing (Fig. 17).
Fit the crevice tool to the vacuum hose (Fig. 18).
Ensure the power switch is turned off and plug in the
power supply.
Turn the motor on by flipping the switch to the "I" (ON)
position (Fig. 14).
The unit will now blow through the vacuum hose and can
be used to clear obstructions within the hose. (Fig. 19)
Once you have finished operation, flip the switch to the
'O' (OFF) position and unplug the power cord from the
power outlet. (Fig. 15)
WARNING
If after a few seconds the hose continues to be blocked,
turn off the unit and clear the hose manually.

MAINTENANCE

Verify that the power cord is disconnected from the outlet.
Disconnect the hose from the container (Fig. 20).
Undo the clamps and remove the top section from the
container (Fig. 21).
Clear all dirt or debris from the container and hose
(Fig. 22).
Clean the HEPA cartridge filter by gently tapping or brushing
dirt off. For optimal performance it is recommended to
regularly change this filter depending on level of use
(eg. 3-6 months). HEPA cartridge filter is not washable.
Use a mild soap and water solution to wash foam filter
and rinse with clean water. (Fig. 23)
Check the hoses, attachments, and power cord to verify
that they have not been damaged.
FAQ's
To reduce the risk of personal injury, unplug the cleaner before performing maintenance/troubleshooting checks.
Problem
The appliance doesn't work
Dust is escaping from the
motor cover
Low suction power and high
motor speed / vibrations
WARNING
Cause
No power
Functional fault in the power cord, switch,
or motor
Tank is full of liquid
The dust bag is missing or damaged
Dust bag is full
Suction nozzle, hose, or tank inlet is blocked.
4
IMPORTANT! CHANGE THE DUST FILTER REGULARLY.
IF THE MACHINE IS USED WITHOUT THE DUST FILTER,
THE MOTOR WILL BURN OUT AND THE WARRANTY
WILL BE VOIDED. ALWAYS KEEP SPARE FILTERS ON
HAND.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing of as
waste. The machine, accessories and packaging
should be sorted for environmental-friendly
recycling.
SYMBOL
Safety Alert
Volts
Hertz
Alternating Current
Watts
Conformity
Please read the instructions carefully before
starting the machine.
Class II equipment
Recycle
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Solution
Check the power supply.
Have the damaged part checked by
qualified personnel or replace it.
Empty the tank
Put in a dust bag or replace it.
Replace the dust bag
Check the suction nozzle, hose, and
tank inlet for obstructions.