Configure The Settings Relating To Panasonic Alarm Protocol [Notification] - Panasonic WV-SW395APJ Operating Instructions Manual

13 Configure the alarm settings [Alarm]
–
When a notification of the remaining capacity of the SD memory card has been provided ("Diag.")
–
When the SD memory card has become full ("Diag.")
–
When the SD memory card cannot be recognized ("Diag.")
•
Default: Off
[Alarm image attachment]
Select "On" or "Off" to determine whether or not to attach an image to the E-mail to be sent when an alarm is
detected.
•
Default: Off
Note
•
The settings for "Image capture size" of the "Alarm image" section on the [Alarm] tab (®page 138) will
be applied to the size of the image to be attached.
Destination of notification
[Address 1] - [Address 4]
Enter the destination E-mail address. Up to 4 destination E-mail addresses can be registered.
•
[Alarm] checkbox: When the checkbox is selected, the E-mail notification will be performed upon an alarm
occurrence.
•
[Destination E-mail address]: Enter the destination E-mail address.
–
Available number of characters: 3 - 128 characters
–
Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_),
and the hyphen (-).
To delete the registered address, click the [Delete] button respective to the desired address.
SW396 SW396 SW395 SW395
•
[Diag.] checkbox: When the checkbox is selected, the E-mail notification will be provided in the following
cases.
–
When notification of the remaining capacity of the SD memory card has been provided
–
When the SD memory card has become full
–
When the SD memory card cannot be recognized
[E-mail subject]
Enter the E-mail subject.
•
Available number of characters: 0 - 50 characters
[E-mail body]
Enter the E-mail body.
•
Available number of characters: 0 - 200 characters
Note
SW396 SW396 SW395 SW395
•
Notification E-mail will be sent with the message "The capacity of the SD memory card is full." when
the SD memory card becomes full, or "The SD memory card cannot be detected." when mounting of
the SD memory card failed.
13.9 Configure the settings relating to Panasonic
alarm protocol [Notification]
Click the [Notification] tab on the "Alarm" page. (®page 47, page 49)
148 Operating Instructions
SC386 SC386 SC385 SC385 SC384 SC384
SC386 SC386 SC385 SC385
SW175 SW175 SW172 SW172
SC384 SC384 SW175 SW175 SW172 SW172
:
ST165 ST165 ST162 ST162
:
ST165 ST165 ST162 ST162