Starting Web Management - Planet GS-5220-16S8CR Quick Installation Manual

L2+ managed gigabit/10 gigabit ethernet switch
Hide thumbs Also See for GS-5220-16S8CR:
Table of Contents

Advertisement

6. Starting Web Management

The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is configured through an Ethernet connection.
Please make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100,
then the manager PC should be set at 192.168.0.x (where x is a number
between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
Managed Switch
IP Address:
192.168.0.100
Logging in the Managed Switch
1. Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100 (the factory default IP address or the one that you have
just changed in console) to access the Web interface.
RJ45/UTP Cable
Figure 6-1: IP Management Diagram
PC / Workstation
with Web Browser
192.168.0.x
9

Advertisement

Table of Contents
loading

Table of Contents