Configuring Ip Address - Planet GS-5220-16S8CR Quick Installation Manual

5. Configuring IP Address
The Managed Switch is shipped with default IP address shown below.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
 Show the current IP Address
1. At the "#" prompt, enter "show ip interface brief".
2. The screen displays the current IP address as shown in Figure 5-1.
 Configuring IP Address
3. At the "#" prompt, enter the following command and press <Enter> as shown
in Figure 5-2.
GS-5220 Series# configure terminal
GS-5220 Series(config)# interface vlan 1
GS-5220 Series(config-if-vlan)# ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Figure 5-1: IP Information Screen
Figure 5-2: Configuring IP Address Screen
7