Alarm Mode - Firstech CompuSTAR 2WFMR User Manual

Step 1: Activate Valet/Programming mode by manually turning the ignition
on and off five times (between Acc and On) with car key within a 10 second
period. The parking light will flash once with successful completion of this
step.
Step 2: Within a 10 second period after cycling the ignition for the 5 time,
th
press button I. The car parking lights will flash once to confirm that the
transmitter has been programmed. Continue program the additional
remotes. The parking lights will flash two times when the programming
mode is expired.

Alarm Mode

Alarm Mode
You can arm or disarm alarm mode by pressing Button I for a ½ second.
Press Buttons (I+II) for a ½ second to make your car siren mute when
arming or disarming your vehicle. Keep in mind that your car siren will still
activate for all other modes (i.e. panic, alarm, shock sensor) regardless of
whether or not your car siren is in mute mode. The car siren will be mute
only when arming or disarming your vehicle.
In alarm mode, the starter kill function (this maybe an optional feature
provided by your installer) is activated. This feature disengages the starter
mechanism on your car that prevents you from starting your car even with a
manual key when your vehicle's alarm mode is activated.
Note: If you lose your remote after you have armed the vehicle, use your key
to open the vehicle. The siren will go off. Turn on and off ignition 5 times
with your key to shut off the siren and turn the system into valet mode.
Cancel the valet mode with remote later. See Valet mode.
© 2001 Firstech, Inc. Page 6