Advertisement
One-Way Remote Owner's Manual
Step 1:
Activate Valet/ Programming mode by man-
ually turning the ignition on then off (between Acc and
On) five times within seven seconds. The parking
lights will flash once with successful completion of
this step.
Step 2:
Within a seven second period after cycling the ignition for
th
the 5
time, Press the
button for a
parking lights will flash once to confirm that the transmitter has been
programmed. You can continue programming the additional remotes at
This Time. The parking lights will flash two times when the program-
ming mode has expired.
To program remote to a secondary vechicle, press the
simultaneously for 2.5 senconds. The LED on the remote will begin to flash
once every two seconds, for 30 seconds. This is the 2nd car mode. During this
time you can perform the above programming steps on the vehicle you wish to
use as the secondary vehicle.
To activate 2nd car mode, press the
and
2.5 seconds. The LED on the remote will begin to flash once every two seconds,
for 30 seconds. During this time, you can use the remote to control the function
of the secondary vehicle.
Reservation Mode (manual transmission only)
In order to auto-start your manual transmission vehicle, you must first
set the
system to Reservation Mode before leaving your
MAGICAR
vehicle. The purpose of Reservation Mode is to leave the transmission
gear in the neutral position when you leave your vehicle. Reservation
mode is intended for use on MANUAL TRANSMISSIONS ONLY
and NOT FOR AUTOMATIC TRANSMISSIONS. Reservation Mode
must be engaged each and every time you leave your manual transmis-
sion vehicle in order to auto-start it.
5
1
/
second. The vehicle
2
and
buttons
buttons simultaneously for
One-Way Remote Owner's Manual
Note :
The system is not recommended for manual transmis-
sion vehicles with removable or convertible tops.
Important Requirements to activate Reservation Mode
- The transmission must be in the NEUTRAL position.
- The vehicle windows must be rolled up.
- Do not set the reservation mode with people in the vehicle.
- Do not auto-start the vehicle with people inside it.
Activating Reservation Mode ( MANUAL TRANSMISSION ONLY )
Step 1 :
After arriving at your destination, and
BEFORE TURNING YOUR ENGINE OFF, place the
transmission in the Neutral position.
Step 2 :
Activate the parking brake.
Step 3 :
Remove your foot from the foot brake.
Step 4 :
Remove the key from the ignition, and the engine will
remain running.
Step 5 :
Exit the vehicle and close the door within two
minutes after activating the parking brake. The engine will
shut off and reservation mode for the remote starter is now
complete.
Valet Mode
While the vehicle is in valet mode, the only features that will function
will be the keyless entry and optional auxiliary functions. In order to
enter Valet mode, press thebuttons simultaneously for a 1/2second.
In order to manually enter Valet Mode, insert your key into the igni-
tion and turn the ignition on and off (between ACC and ON) five times
within 7 seconds
6
Advertisement
