Connecting the HDMI cable and power
Once InstaShow Host has been positioned properly near the display, connect the HDMI cable and
power to ensure signal transmission.
To supply power to InstaShow Host, do one of the following.
Assemble the adapter. See
• Some of the BenQ projector models may be equipped with a USB type A jack (5V/1.5V) to provide
power supply for InstaShow Host. See
details.
• For display models without a USB type A jack (5V/1.5V) for power supply, see
power adapter on page 13
Assembling the adapter
Every InstaShow™ adapter has two plug socket options included in the box: standard European and
standard British.
To connect the plug of your choice, follow the steps below.
1. Align and insert the bottom hook to the adapter.
2. Close the gap by pushing the plug.
3. The adapter is successfully assembled when it clips into place.
To disconnect the plug, follow the steps below.
1. Push the latch in the middle.
2. Open the gap by pulling the gap downwards.
Assembling the adapter on page 11
Power supply via a USB type A jack (5V/1.5V) on page 12
for details.
3
OPEN
1
OPEN
for details.
Power supply via a
2
for
Installation
11