Page 1
Instruction Instruction How to access Web Management and change HDCP setting to Auto? For BenQ: WDC10 (InstaShow) Applicable for All Regions Version: 01 Date: 2016/10/13 BenQ Corporation...
Page 2
2. Connect power source to InstaShow Host (RX) using a USB A to micro USB B cable. 3. Wait until the LED indicator on your InstaShow Host lights up static green. 4. Turn off the Wi-Fi of your laptop or PC. 5. Change laptop's IP address to 192.168.20.X (e.g. 192.168.20.100). BenQ Corporation...
Page 3
7. Enter the default user name (admin) and password (0000) to log in. 8. You can do the FW / Driver upgrade in Web Management. Please follow the installation guide to do upgrade FW / Driver of Host and Buttons. BenQ Corporation...
Page 4
How to change HDCP setting to HDCP auto? 1. Access Web Management. http://192.168.20.1 2. Access Factory Menu by below link on browser. http://192.168.20.1/whe_hidden_rx.htm 2. Change the "HDCP Auto" function to On 3. Then press Apply to save the setting. 4. Done. BenQ Corporation...