If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Stanley Fat Max KFFMEW630 planer has been protected supply. Use of an RCD reduces the risk of designed for planing wood, wood products and plastics. The electric shock.
(Original instructions) ENGLISH d. Store idle power tools out of the reach of children and Warning! Contact with, or inhalation of dusts arising from do not allow persons unfamiliar with the power tool or planing applications may endanger the health of the operator these instructions to operate the power tool.
To remove the parallel fence proceed in reverse order. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Stanley Fat Max Service Connecting a vacuum cleaner to the tool (fig. D) Centre in order to avoid a hazard.
The performance of your tool depends on the accessory used. Adjust the depth of cut. Stanley Fat Max accessories are engineered to high quality If necessary, fit and adjust the parallel fence. standards and designed to enhance the performance of your tool.
Sound pressure (L ) 84 dB(A), uncertainty (K) 3 dB(A) repair agent can be obtained on the Internet at www.2helpU. com, or by contacting your local Stanley Fat Max office at the Sound power (L ) 95 dB(A), uncertainty (K) 3 dB(A) address indicated in this manual.