(RCD) protected supply. Use of an RCD reduces the risk of Intended use electric shock. Your Stanley planer has been designed for planing wood, wood products and plastics. The tool is intended for hand-held 3. Personal safety use.
If the supply cord is damaged, it must be replaced by the may lead to loss of control. manufacturer or an authorised Stanley Service Wait for the cutter to stop before setting the tool down. Centre in order to avoid a hazard.
ENGLISH Features Planing (Figures 4, 5, 6) @ CAUTION: Allow the tool to reach full speed before A. Trigger switch touching tool to the work surface. Lift the tool from the work B. Lock-on button surface. Lift the tool from the work surface before turning the C.
ENGLISH d. Attach belt cover and securely tighten screws. Vacuum Adaptor (Figure 10) @ WARNING: Turn off and unplug the tool before making Adjusting cutters (Figure 14) any adjustments or removing or installing accessories. a. Place the blade (L) on the adjust plate (M),and make the a.
Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Stanley product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.