Table of Contents
Advertisement
Table 17 Network Setting > Broadband > Add/Edit New WAN Interface (Routing Mode)
LABEL
DESCRIPTION
IAID
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN connection
index number.
DUID
Enter the hardware type, a time value and the MAC address of the device.
option 125
Select this to have the Zyxel Device automatically generate and add vendor specific
parameters in the DHCP discovery packets that go to the DHCP server.
IPv6 Address (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode field.)
Obtain an IPv6
Select Obtain an IPv6 Address Automatically if you want to have the Zyxel Device use the IPv6
Address
prefix from the connected router's Router Advertisement (RA) to generate an IPv6 address.
Automatically
Static IPv6
Select Static IPv6 Address if you have a fixed IPv6 address assigned by your ISP. When you select
Address
this, the following fields appear.
IPv6 Address
Enter an IPv6 IP address that your ISP gave to you for this WAN interface.
Prefix Length Enter the address prefix length to specify how many most significant bits in an IPv6 address
compose the network address.
IPv6 Default
Enter the IP address of the next-hop gateway. The gateway is a router or switch on the same
Gateway
segment as your Zyxel Device's interface(s). The gateway helps forward packets to their
destinations.
IPv6 DNS Server (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode field.
Configure the IPv6 DNS server in the following section.)
Obtain IPv6 DNS
Select Obtain IPv6 DNS Info Automatically to have the Zyxel Device get the IPv6 DNS server
Info
addresses from the ISP automatically.
Automatically
Use Following
Select Use Following Static IPv6 DNS Address to have the Zyxel Device use the IPv6 DNS server
Static IPv6 DNS
addresses you configure manually.
Address
Primary DNS
Enter the first IPv6 DNS server address assigned by the ISP.
Server
Secondary DNS
Enter the second IPv6 DNS server address assigned by the ISP.
Server
IPv6 Routing Feature (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode
field. You can enable IPv6 routing features in the following section.)
MLD Proxy
Select this check box to have the Zyxel Device act as an MLD proxy on this connection. This
Enable
allows the Zyxel Device to get subscription information and maintain a joined member list for
each multicast group. It can reduce multicast traffic significantly.
Apply as Default
Select this option to have the Zyxel Device use the WAN interface of this connection as the
Gateway
system default gateway.
DS-Lite
This is available only when you select IPv6 Only in the IPv4/IPv6 Mode field. Enable Dual Stack
Lite to let local computers use IPv4 through an ISP's IPv6 network. See
for more information.
Click this switch to let local computers use IPv4 through an ISP's IPv6 network. When the switch
goes to the right
DS-Lite Relay
Specify the transition router's IPv6 address.
Server IP
6RD
The 6RD (IPv6 rapid deployment) fields display when you set the IPv6/IPv4 Mode field to IPv4
Only. See
Click this switch to tunnel IPv6 traffic from the local network through the ISP's IPv4 network. When
the switch goes to the right
Chapter 6 Broadband
, the function is enabled. Otherwise, it is not.
IPv6 Rapid Deployment on page 76
, the function is enabled. Otherwise, it is not.
PX7511-B0 User's Guide
82
Dual Stack Lite on page 76
for more information.
Advertisement
Table of Contents
