Figure 76 Red Hat 9.0: Kde: Network Configuration: Dns; Figure 77 Red Hat 9.0: Kde: Network Configuration: Activate - ZyXEL Communications G570S V2 User Manual

802.11g wireless access point

Table of Contents

Appendix B Setting up Your Computer's IP Address

• If you have a dynamic IP address, click Automatically obtain IP address settings

• If you have a static IP address, click Statically set IP Addresses and fill in the

3 Click OK to save the changes and close the Ethernet Device General screen.

4 If you know your DNS server IP address(es), click the DNS tab in the Network

Configuration screen. Enter the DNS server information in the fields provided.

Figure 76 Red Hat 9.0: KDE: Network Configuration: DNS

5 Click the Devices tab.

6 Click the Activate button to apply the changes. The following screen displays. Click Yes

to save the changes in all screens.

7 After the network card restart process is complete, make sure the Status is Active in the

Network Configuration screen.

Using Configuration Files

Follow the steps below to edit the network configuration files and set your computer IP

address.

1 Assuming that you have only one network card on the computer, locate the

eth0

configuration file with any plain text editor.

• If you have a dynamic IP address, enter

120

with and select dhcp from the drop down list.

Address, Subnet mask, and Default Gateway Address fields.

configuration file (where

following figure shows an example.

is the name of the Ethernet card). Open the

eth0

in the

dhcp

ifconfig-

field. The

BOOTPROTO=

ZyXEL G-570S v2 User's Guide

Table of Contents