Table 32 Wireless Specifications; Table 33 Approvals - ZyXEL Communications G570S V2 User Manual

Appendix A Product Specifications
Table 31 Feature Specifications (continued)
Output Power
Management
Limit the Number of
Client Connections
Wireless Specifications

Table 32 Wireless Specifications

Data Rate
Communication Method
Transmission/Emission Type
Security
RF frequency range
Data modulation type
Output Power (peak)
Sensitivity
Coverage
Antenna
Approvals

Table 33 Approvals

SAFETY
104
Output Power Management is the ability to set the level of output power.
There may be interference or difficulty with channel assignment when there
is a high density of APs within a coverage area. In this case you can lower
the output power of each access point, thus enabling you to place access
points closer together.
You may set a maximum number of wireless stations that may connect to the
ZyXEL Device. This may be necessary if for example, there is interference
or difficulty with channel assignment due to a high density of APs within a
coverage area.
Super G/11g: 108M/54M/48M/36M/24M/18M/12M/9/6 Mbps auto
fallback
11b: 11Mbps/5.5Mbps/2Mbps/1Mbps auto fallback
Half Duplex
Direct Sequence Spread Spectrum (DSSS)
Wired Equivalent Privacy (WEP) data encryption
Dynamic WEP key exchange
WiFi Protected Access (WPA)
IEEE 802.1x
2.412~2.462GHz: North America
2.412MHz~2.484 GHz: Japan
2.412-2.472 GHz: Europe ETSI
OFDM/BPSK/QPSK/CCK/PBCC/DQPSK/DBPSK
11b : 18+/-2dBm @ 11/5.5/2/1Mbps.
11g : 20+/-2dBm @ 54Mbps.
54M: -65dBm
Indoor: up to 100meters
Outdoor: up to 400meters
1 external detachable 2dBi dipole antenna with R-SMA connector
North America
European Union (CE mark)
11M: -80dBm
ANSI/UL-1950 3rd
CSA C22.2 No. 950 3rd
EN60950 (1992+A1+A2+A3+A4+A11)
IEC 60950 3rd
ZyXEL G-570S v2 User's Guide