Setup To Manage Your Access Point Locally With Browser-Based Admin Tool - Linksys LAPAC1200C User Manual

If not, create an account by completing the on-screen forms. Then, register the access point at
the new account.
We'll send you a confirmation email. Click on the link and finish setting up your access point.
Setup to manage your access point locally with browser-
based admin tool
Step1
Make sure the access point is powered on and connected with an ethernet cable to your network.
If the indicator light is off, check that the AC power adapter, or PoE cable, is properly connected
on both ends.
Step 2
Enter the IP address of your access point. By default, the IP address will be assigned by a DHCP
server (usually the network router). If there is no DHCP server on your network, the default IP
address is 192.168.1.252/255.255.255.0.
Step 3
Type in default username: admin, and password: admin.
Step 4
Click Login and disable the cloud management capability by clicking the Disable Cloud Manager
button in the upper right corner of the screen.
7