Table of Contents
Advertisement
Package Contents
Linksys Wireless Access Point
•
•
Quick Start Guide
•
Ethernet Cable
AC Power Adapter
•
•
CD with Documentation
•
Mounting Bracket
•
Mounting Kit
•
Ceiling Mount Back Plate
Drilling Layout Template
•
Device Features
There is one indicator light on the front/top of the access point.
Light Color
Activity
Blinking
Green
Solid
Blinking
Blue
Solid
Red
Solid
Ports and Button
Power Port—Connect the AC power adapter to this port.
Note—Use only the adapter that came with your access point.
Ethernet Port
—Connect a wired network device to this port. This port supports PoE (Power
over Ethernet) with a PoE switch or PoE injector. LAPAC1200C and LAPAC1750C can be
powered on from an 802.3 af/at (PoE+) compliance source. Using CAT5e or better cable is high
recommended. The maximum power consumption of LAPAC1200C is 13W and LAPAC1750C is
15W.
Note—When both PoE and AC power adapter are connected to access point, device will
get power from PoE as higher precedence.
Reset Button—Press and hold this button for less than 15 seconds to power cycle device. Press
and hold for longer than 15 seconds to reset the device to factory default settings.
Status
System is starting.
System is normal; no wireless devices connected.
Software upgrade in process.
System is normal; at least one wireless device connected.
Startup process or update failed; hard reset or service required.
4
Advertisement
Table of Contents
