Add And Delete Device - TRENDnet TEW-825DAP User Manual

TRENDnet User's Guide
o DHCP: Select this option to allow the device to receive IP address from your
DHCP server
o Static: Select this option to manually set the IP address of the device

IP Address: Enter the IP address to assign to the device

Subnet Mask: Enter the subnet mask to assign to the device

Gateway: Enter the gateway IP address to assign to the device
 System Name: Assign name of the device to help distinguish between similar
devices
 VLAN ID: Assigns the VLAN ID for the Ethernet port.
 Band Steer: Select this to enable/disable band steering
 Band: Select on the pull‐down menu the wireless interface to configure
 802.11 Mode: Select the 802.11 mode of the selected wireless interface
 Channel: Select the wireless channel of the selected wireless interface
 VLAN ID: Assigns the VLAN ID for the primary SSID.
 interface
 Separate Stations: Select this option to restrict wireless client devices from
accessing other client devices connected to this network(s).
 Enable: Select this option to enable the selected wireless interface
 Visible: Select this option to wireless broadcast the selected wireless interface
 SSID: Enter the SSID (Wireless Network Name) of the selected wireless interface
 Security: Select the wireless encryption security for to assign the selected
wireless interface
 Key: Enter the wireless encryption security key or password
 Password: Enter the login password of the device and click OK to save settings
Add and Delete Device
Add device
1. Run the utility
2. To add a device to control select the "+" on the upper right corner.
© Copyright 2017 TRENDnet. All Rights Reserved.
3. Enter the IP address of the device you would like to add to the controller and press
OK.
Delete device
1. Run the utility
2. To delete a device from the controller. Select the device from the listed devices and
click "‐" on the upper right corner.
3. Confirm the deletion of the device by pushing Ok.
TEW‐825DAP
38