Table of Contents
Advertisement
AUDIO SETTINGS
While listening to any source...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CTRL], then press the knob.
3
Turn the volume knob to make a selection (see the table below), then press
the knob.
3
Repeat step
until the desired item is selected or activated.
4
Press and hold
to exit.
• To return to the previous hierarchy, press
KDC - U4556
Default: For
/
KDC - U4556
For
/
KDC - 3757URM
For
SUB-W LEVEL
–15 to +15 (0):
1
BASS LEVEL
–8 to +8 (+8*
/ 0*
1
MID LEVEL
–8 to +8 (+2*
/ 0*
1
TRE LEVEL
–8 to +8 (+3*
/ 0*
EQ PRO
BASS ADJUST
BASS C FRQ
BASS LEVEL
BASS Q FCTR
BASS EXTEND
MID ADJUST
MID C FRQ
MID LEVEL
MID Q FCTR
TRE ADJUST
TRE C FRQ
TRE LEVEL
2
PRESET EQ
NATURAL*
/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL*
Selects a preset equalizer suitable to the music genre. (Select [USER] to use the
customized bass, middle, and treble settings.)
.
KDC - U3556
KDC - 3757URM
KDC - 3657UGM
/
/
KDC - U3556
1
: XX*
KDC - 3657UGM
/
: XX*
2
Adjusts the subwoofer output level.
2
):
Adjusts the level to memorize for each source.
2
):
(Before making an adjustment, select the source you
want to adjust.)
2
):
60/ 80/ 100/ 200: Selects the center frequency.
1
2
–8 to +8 (+8*
/ 0*
): Adjusts the level.
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
1
ON*
: Turns on the extended bass. ; OFF*
2
1
0.5K/ 1.0K*
/ 1.5K/ 2.5K*
: Selects the center
frequency.
1
2
–8 to +8 (+2*
/ 0*
): Adjusts the level.
0.75/ 1.00/ 1.25: Adjusts the quality factor.
10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center
frequency.
1
2
–8 to +8 (+3*
/ 0*
): Adjusts the level.
BASS BOOST
LOUDNESS
BALANCE
FADER
SUB-W SET
: XX
DETAIL SET
HPF
LPF SUB-W
SUB-W PHASE
SUPREME SET
2
: Cancels.
VOL OFFSET
(Default: 0)
KDC - U4556
Except for
• [SUB-W LEVEL]/ [SUB-W SET]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if
[SWITCH PRE] is set to [SUB-W]. (➜ 4)
1
:
• [SUB-W LEVEL]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SUB-W SET] is set
to [ON].
1
B.BOOST LV1*
/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred
2
bass boost level. ; OFF*
: Cancels.
2
LOUD LV1*
/ LOUD LV2: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
1
level. ; OFF*
: Cancels.
L15 to R15 (0): Adjusts the left and right speaker output balance.
R15 to F15 (0): Adjusts the rear and front speaker output balance.
ON: Turns on the subwoofer output. ; OFF: Cancels.
KDC - U4556
For
:
THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/
150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
160 Hz are sent to the subwoofer.
REV (180°)/ NORM (0°): Selects the phase of the subwoofer output to
be in line with the speaker output for optimum performance. (Selectable
only if a setting other than [THROUGH] is selected for [LPF SUB-W].)
ON: Creates realistic sound by interpolating the high-frequency
components that are lost in AAC/MP3/WMA audio compression. ;
OFF: Cancels. (Selectable only when playing back an AAC/MP3/WMA
disc or a USB device, except iPhone/iPod.)
–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
:
ENGLISH |
9
Advertisement
Table of Contents
